Details, Explanation and Meaning About SI

SI Guide, Meaning , Facts, Information and Description

The International System of Units, (symbol: SI) (for the French phrase Système International d'Unités), is the most widely used system of units. It is used for everyday commerce in virtually every country of the world except the United States. SI was selected from the existing Metre-Kilogram-Second system of units (MKS), with the addition of extra units, rather than the older Centimetre-Gram-Second system of units (CGS). SI is sometimes referred to as the metric system (especially in the United States, which has not widely adopted it (although it has been used more commonly in recent years), and the UK, where conversion is incomplete). However, not all metric units of measurement are accepted as SI units.

There are seven base units and several derived units, together with a set of prefixeses. Non-SI units can be converted to SI units (or vice versa) according to the conversion of units.

Table of contents
1 Origin
2 Basis
3 SI writing style
4 Units
5 Spelling variations
6 See also
7 External links
8 Further reading

Origin

The units of the SI system are decided by a series of international conferences organised by the Bureau International des Poids et Mesures (International Office of Weights and Measures). The SI system was first given its name in 1960, and last added to in 1971.

The true origins of the SI or metric system date back to approximately 1640. It was invented by French scientists, and was given a huge boost in popularity by the French Revolution of 1789. The metric system tried to choose units which were non-arbitrary, merging well with the revolution's official ideology of "Pure Reason". The layout of the metric system may have been based on the idealistic world-view of ancient Greeks, who theorized that there were four basic elements: earth, water, fire and air.

The most important unit is that of length: one metre was intended to be equal to 1/10,000,000thof the distance from the pole to the equator along the meridian through Paris. This is approximately 10% longer than one yard. Later on, a platinum rod with a rigid, X-shaped cross section was produced to serve as the easy-to-check standard for one metre's length. However, due to a miscalculation by researchers of the flattening effect the earth's rotation had on its circumference, the first platinum prototype was short by 0.2 millimetres. Later on, a multiple of a specific radiation wavelength was introduced to abstractly define the (unchanged) length of the metre unit, and finally the metre was defined as the distance travelled by light in a vacuum in a specific period of time.

The unit of mass is the kilogram, which was defined by a cube filled with densest (which is +4° Celsius) distilled pure water and having sides equal to 1/10th of a metre. This volume contains one kilogram of water. One kilogram is about 10% heavier than two pounds (2 lb). The cubic space is also known as one litre so volume of different liquids can be compared. Later on, a platinum-iridium metal cylinder was manufactured to serve as the one kilogram weight standard and remained so ever since.

The unit of temperature became the centigrade or inverted Celsius grade, which means the mercury scale is divided into 100 equal length parts between the water-ice mixture and the boiling point of pure, distilled water. Boiling water thus becomes one hundred degrees centigrade hot and freezing is zero degrees. This is the metric unit of temperature in everyday use. A hundred year later, scientists discovered there is an absolute minimum temperature and nothing can be colder than that. This prompted experts to relocate the zero place to mark this temperature, thus creating the Kelvin scale.

The metric unit of time remained the second. One definition of day is 86,400 seconds. The formal definition of the second has been changed several times for enhanced scientific requirements (astronomic observations, tuning fork clock, quartz clock and then caesium atomic clock) but wristwatch users remain relatively unaffected.

The swift worldwide adoption of the metric system as a tool of economy and everday commerce illustrates the easiness of calculations performed within its framework.

Cultural differences can be represented in the local everyday uses of metric units. For example, bread is sold in one-half, one or two kilogram sizes in most countries, but you buy them by multiples of one hundred grams in the former USSR.

Non-scientific people should not be put off by the fine-tuning that has happened to the metric base units over the past two hundred years, as experts regularly tried to refine the metric system to fit the best scientific researcher (e.g. MKG to CGS to SI system changes or the invention of Kelvin scale). These changes almost never affect the everyday use of metric units. Misrepresentation of these adjustments has been one common tactic of diehard fans of the U.S. customary units against metrication.

Basis

SI is built on seven SI base units, the kilogram, metre, second, ampere, kelvin, mole, and candela. These are used to define various SI derived units.

SI also defines a number of SI prefixes to be used with the units: these combine with any unit name to give subdivisions and multiples. For example, the prefix kilo denotes a multiple of a thousand, so the kilometre is 1 000 metres, the kilogram 1 000 grams, and so on. Note that a millionth of a kilogram is a milligram, not a microkilogram.

SI writing style

  • Symbols are written in lower case, except the symbols that are derived from the name of a person. This means that the symbol for the SI unit for pressure, named after Blaise Pascal, is Pa, whereas the unit itself is written pascal. The official SI brochure lists the symbol for the litre as an allowed exception to the capitalization rules: either capital or lowercase L is acceptable.

  • Symbols are written in singular, e.g. 25 kg (not "25 kgs").

  • It is preferable to keep the symbol in upright roman type (for example, m for metres, l for litres), so as to differentiate from mathematical and physical variables (for example, m for mass, l for length).

  • A space is left between the numbers and the symbols: 2.21 kg, 7.3·102 m2

  • SI uses spaces to separate decimal digits in sets of three. e.g. 1 000 000 or 342 142 (in contrast to the commas or dots used in other systems, e.g. 1,000,000 or 1.000.000).

  • SI used only a comma as the separator for decimal fractions until 1997. The number "twenty four and fifty one hundredths" would be written as "24,51". In 1997 the CIPM decided that the British full stop (the "dot on the line", or period) would be the decimal separator in text whose main language is English ("24.51"); the comma remains the decimal separator in all other languages.

  • Symbols for derived units formed from multiple units by multiplication are joined with a space or centre dot (·), e.g. N m or N·m.

  • Symbols formed by division of two units are joined with a solidus (/), or given as a negative exponent, e.g. m/s, m s-1 or m·s-1. A solidus should not be used if the result is ambiguous, e.g. kg·m-1·s-2, not "kg/m/s2".

  • The symbol (or prefix) can be used in place of the decimal separator. 2.3k would be 2k3, 4.7A (Amps) would be 4A7, and 0.0047F would be 4m7F.

The system can legally be used in every country in the world, and many countries do not maintain definitions of other units. Those countries that still give official recognition to non-SI units (e.g. the US and UK) define them in terms of SI units; for example, the inch is defined to be exactly 0.0254 metres. It was adopted by the 11th General Conference on Weights and Measures (CGPM) in 1960. (See weights and measures for a history of the development of units of measurement.)

Units

Base units

The following are the fundamental units from which all others are derived, they are dimensionally independent. The definitions stated below are widely accepted.

Name Symbol Quantity Definition
metre m Length The unit of length is equal to the length of the path travelled by light in a vacuum during the time interval of 1/299 792 458 of a second. This number is exact; the metre is defined this way.
kilogram kg Mass The unit of mass is equal to the mass of the international prototype kilogram (a platinum-iridium cylinder) kept at the Bureau International des Poids et Mesures (BIPM), Sèvres, Paris. Note that the kilogram is the only base unit with a prefix; the gram is defined as a derived unit, equal to 1/1 000 of a kilogram.
second s Time The unit of time is the duration of exactly 9 192 631 770 periods of the radiation corresponding to the transition between two hyperfine levels of the ground state of caesium-133 atom.
ampere A Electrical Current The unit of electrical current is the constant current which, if maintained in two straight parallel conductors, of infinite length and negligible cross-section, placed 1 metre apart in a vacuum, would produce a force between these conductors equal to 2×10 −7 newton per metre of length.
kelvin K Absolute Temperature The unit of thermodynamic temperature (or absolute temperature) is the fraction 1/273.16 (exactly) of the thermodynamic temperature at the triple point of water.
mole mol Amount of substance The unit of amount of substance is the amount of substance which contains as many elementary entities as there are atoms in 0.012 kilogram of pure carbon-12. (Elementary entities may be atoms, molecules, ions, electrons, or particles.) It is approximately equal to 6.02214199×1023 units.
candela cd Luminous intensity The unit of luminous intensity is the luminous intensity, in a given direction, of a source that emits monochromatic radiation of frequency 540×1012 hertz and that has a radiant intensity in that direction of 1/683 watt per steradian.

Dimensionless derived units

The following SI units are derived from the base units and are dimensionless.

Name Symbol Quantity Definition
radian rad Angle The unit of angle is the angle subtended at the centre of a circle by an arc of the circumference equal in length to the radius of the circle. There are radians in a circle.
steradian sr Solid angle The unit of solid angle is the solid angle subtended at the centre of a sphere of radius r by a portion of the surface of the sphere having an area r2. There are steradians in a sphere.

Derived units with special names

Base units can be put together to derive units of measurement for other quantities. Some have been given names.

Name Symbol Quantity Expressed in base units
hertz Hz Frequency s-1
newton N Force kg m s -2
joule J Energy N m = kg m2 s-2
watt W Power J/s = kg m2 s-3
pascal Pa Pressure N/m2 = kg m -1 s-2
lumen lm Luminous flux cd sr
lux lx Illuminance cd sr m-2
coulomb C Electric Charge A s
volt V Electrical potential difference J/C = kg m2 A-1 s-3
ohm Ω Electric resistance V/A = kg m2 A-2 s-3
farad F Electric capacitance Ω-1 s = A2 s4 kg-1 m-2
weber Wb Magnetic flux kg m2 s-2 A-1
tesla T Magnetic flux density Wb/m2 = kg s-2 A-1
henry H Inductance Ω s = kg m2 A-2 s-2
siemens S Electric conductance Ω-1 = kg-1 m-2 A2 s3
degree Celsius °C Celsius temperature K
becquerel Bq Radioactivity (decays per unit time) s-1
gray Gy Absorbed dose (of ionising radiation) J/kg = m2 s-2
sievert Sv Equivalent dose (of ionising radiation) J/kg = m2 s-2
katal kat Catalytic activity mol/s = mol s-1

The unit of volume litre, symbol L or l and being equal to 0.001 m3, is not an SI unit but is "accepted for use with the International System."

SI prefixes

The following SI prefixes can be used to prefix any of the above units to produce a multiple or submultiple of the original unit.

Spelling variations

Several nations, notably the United States, typically use the spellings 'meter' and 'liter' instead of 'metre' and 'litre'. This is in keeping with standard American English spelling (for example, Americans also use 'center' rather than 'centre'; see also American and British English differences). In addition, the official US spelling for the SI prefix 'deca' is 'deka' (again, a variation not recognized by the BIPM).

The US government has approved these spellings for official use, but the BIPM only recognizes the British English spellings as official names for the units. In scientific contexts only the symbols are used; since these are universally the same, the differences do not arise in practice in scientific use.

The unit 'gram' is also sometimes spelled 'gramme' in English-speaking countries other than the United States, though that is an older spelling and use is declining.

See also

External links

Official

Information

Further reading

  • I. Mills, Tomislav Cvitas, Klaus Homann, Nikola Kallay, IUPAC: Quantities, Units and Symbols in Physical Chemistry, 2nd ed., Blackwell Science Inc 1993, ISBN 0632035838.


This is an Article on SI. Page Contains Information, Facts Details or Explanation Guide About SI


Google
 
Web www.E-paranoids.com

Search Anything