S-Video Guide, Meaning , Facts, Information and Description
S-Video (also known as Y/C) is a baseband analog video format offering a higher quality signal than composite video, but a lower quality than RGB and component video. This mid-level format divides the signal into two channels - luminance and chrominance.| Table of contents |
|
2 Connector 3 Usage 4 See also 5 References |
Method
The luminance signal and modulated chrominance subcarrier information are carried on separate signal/ground pairs. The luminance signal is effectively a black-and-white television signal with the timing of a color composite video signal. Because the luminance signal is carried on a separate wire, it does not need to be low-pass filtered to prevent crosstalk between high-frequency luminance information and the color subcarrier. This allows a higher bandwidth to be used for the luminance information, and also eliminates the color crosstalk problem.
The luminance performance of S-Video is similar to analog component video, but the chrominance performance retains most of the other defects of composite video, apart from the crosstalk problem. S-video signal cable can not produce picture quality better beyond 5 meters than 1 meter cable. More than 5 meters, there will be signal loss in picture quality compared to component video. For long distance it is recommended to use component or composite video signal for better quality.
Today, S-Video signals are generally connected using 4-pin mini-DIN connectors using a 75 ohm termination impedance. The pins in the connectors bend easily, hence care must be taken when plugging the cables in--else a pin is likely to bend, causing the loss of color, corruption of the signal, or complete loss of the signal.
Before the mini-DIN plug became standard, S-Video signals were often carried through different types of plugs. For example, the Commodore 64 home computer of the 1980s, one of the first widely available devices to feature S-Video output, used an 8-pin standard size DIN plug on the computer end and a pair of RCA plugs on the monitor end.
Today, S-Video signals can be transferred through SCART connections as well. However the SCART connector must explicitly support S-Video as it is not part of the original SCART standard.
This is an Article on S-Video. Page Contains Information, Facts Details or Explanation Guide About S-Video Connector
Usage
S-Video is commonly used on consumer DVD players, VTRss, and modern game consoles. It is also available on some professional equipment and computer video capture and playback cards.See also
References