Reflecting telescope Guide, Meaning , Facts, Information and Description
A '\reflecting telescope (reflector') is an optical telescope which uses mirrors, rather than lenses, to reflect light. The British scientist Sir Isaac Newton designed the first reflector circa 1670. He designed the reflector in order to solve the problem of chromatic aberration, which occurred in all refracting telescopes before the perfection of achromatic lenses. The traditional two-mirrored reflector is known as a Newtonian reflector.While the Newtonian focus design still used in amateur astronomy, professionals now tend to use prime focus, Cassegrain focus, and coudé focus designs. By 2001, there were at least 49 reflectors with primary mirrors having diameters of 2m+.
| Table of contents |
|
2 Reflecting telescope designs 3 Focal planes 4 See also |
Reflecting telescopes do not have as many technical issues as refracting telescopes. They are also less expensive for the same light-gathering power due to the relative cheapness of mirrors versus astronomy-grade lenses.
Reflectors which have spherical mirrors (rather than parabolic mirrors) tend to suffer from spherical aberrations. These aberrations can be corrected with a Schmidt corrector plate; however, corrected non-parabolic reflectors still lack the magnification-power of parabolic reflectors.
Nearly all large research-grade astronomical telescopes are reflectors.
There are several reasons for this:
A Newtonian telescope placed on a simple altazimuth mounting is known as a Dobsonian. This variant is popular with amateur astronomers, as it allows for a large primary mirror in a relatively cheap and lightweight telescope.
The Ritchey-Chrétien is a specialized Cassegrain reflector which has two hyperbolic mirrors (instead of a parabolic primary). It is free of coma and spherical aberration at a flat focal plane, making it well suited for wide field and photographic observations. Almost every professional reflector telescope in the world is of the Ritchey-Chrétien design. It was invented by George Willis Ritchey and Henri Chrétien in the early 1910s.
One exception to the supremacy of Ritchey-Chrétien telescopes for professional use are Schmidt cameras. These instruments have a very wide field, a sharp focus, about 30 times greater than Ritchey-Chrétien, with the drawbacks that the focus is inaccessible, making them usable only as cameras, and to Cassegrain, they have their physical length at least twice their focal length. Their optical performance comes from the use of a spherical mirror which reintroduces the spherical and field curvature aberrations, but avoids all the others. The spherical aberration is overcome by using a corrector lens in front of the telescope at the radius of the curvature of the mirror. The field curvature are compensated with a film-holder that stretches the film into a mild spherical shape.
The Schmidt-Cassegrain is a classic wide-field telescope. The first optical element is a Schmidt corrector plate. The plate is figured by placing a vacuum on one side, and grinding the exact correction required to correct the spherical aberration caused by the primary mirror. Thirty inch Schmidt-Cassegrains are used for sky surveys at astronomical observatories and satellite tracking stations.
The Maksutov is similar to the Cassegrain. It starts with an optically transparent corrector lens that is a section of a hollow sphere. It has a spherical primary mirror, and a spherical secondary that is often just a mirrored section of the corrector lens. Maksutovs are mechanically simpler than small Cassegrains, have a closed tube and all-spherical optics. Maksutovs have a narrower field of view than Schmidt-Cassegrains and are generally heavier as well. However, their small secondary mirror gives them better resolution than a Schmidt-Cassegrain.
One very popular luxury telescope design was the Celestron. It ran a "finder" scope and the main scope to the same eyepiece. It had a 10cm Maksutov reflector as the main telescope. The finder was a 2.5 cm refractor. The focal plane of the reflector and refractor were the same (probably the refractor had a factory adjustment). A flat-mirror near the bottom reflected light to the finder's primary, and a movable mirror at the back of the 10-cm cassegrain hole switched the optical path of the large telescope between the eyepiece and the camera attachment on the back. When the camera was engaged, the finder-scope was operational.
An unusual variant of the Cassegrain is the Schiefspiegler telescope ("skewed" or "oblique reflector"), which uses tilted mirrors to avoid the secondary mirror casting a shadow on the primary. However, while eliminating diffraction patterns this leads to several other aberrations that must be corrected.
Radio telescopes often have a prime focus design. The mirror is replaced by a metal surface for reflecting radio waves, and the observer is an antenna.
This is an Article on Reflecting telescope. Page Contains Information, Facts Details or Explanation Guide About Reflecting telescope Technical considerations
Reflecting telescope designs
Newtonian focus
The Newtonian has a parabolic primary mirror, and a flat secondary that reflects the focal plane to the side of the top of the telescope tube. It is one of the simplest and least expensive designs for a given size of primary, and is popular with amateurs. Since the light path is unfolded, the tube is quite long and heavy. The parabolic mirror is difficult to produce with accuracy. Some amateurs produce a spherical mirror, and live with the spherical aberration. The spider supporting the secondary mirror often introduce diffractive effects that cause stars to appear to "flare" in four or six directions.Cassegrain focus
The Cassegrain has a parabolic primary mirror, and a hyperbolic secondary mirror that reflects the light back down through a hole in the primary. Folding the optics makes this a compact design. On smaller telescopes, and camera lenses, the secondary is often mounted on an optically-flat, optically-clear glass plate that closes the telescope tube. This support eliminates the "star-shaped" diffraction effects caused by a support spider. The closed tube stays clean, and the primary is protected, at some loss of light-gathering power. Focal planes
Prime focus
In a prime focus design, the observer sits inside the telescope, at the focal point of the reflected light. In the past this would be the astronomer himself, but nowadays CCD cameras are used.Coudé focus
The Coudé design is similar to the Cassegrain except no hole is drilled in the primary mirror; instead, a third mirror reflects the light to the side, and further optics deliver the light to a fixed focus point that does not move as the telescope is reoriented. This design is often used on large observatory telescopes, as it allows heavy observation equipment, such as spectrographs, to be more easily used.See also