Heat conduction Guide, Meaning , Facts, Information and Description

Conduction is the transfer of heat or electric current from one substance to another by direct contact. For more information about the electrical sense, see current (electricity) and electrical conduction.

In the case of heat, the transfer is always from a higher temperature to a lower temperature. Denser substances are usually better conductors; metals are excellent conductors.

The law of heat conduction also know as Fourier's law states that the time rate of heat flow Q through a slab (or a portion of a perfectly insulated wire, as shown in the figure) is proportional to the gradient of temperature difference:

A is the transversal surface area, Δ x is the thickness of the body of matter through which the heat is passing, K is a conductivity constant dependent on the nature of the material and its temperature, and ΔT is the temperature difference through which the heat is being transferred. This law forms the basis for the derivation of the heat equation.

Table of contents

1 Conductance 2 Newton's law of cooling 3 See also

Conductance

Writing

Fourier's law can also be stated as:

where U is the conductance. The reciprocal of conductance is resistance, equal to '

and it is resistance which is additive when several conducting layers lie between the hot and cool regions, because A and Q are the same for all layers. In a multilayer partition, the total conductance is related to the conductance of its layers by:

So, when dealing with a multilayer partition, the following formula is usually used:

When heat is being conducted from one fluid to another through a barrier, it is sometimes important to consider the conductance of the thin film of fluid which remains stationary next to the barrier. This thin film of fluid is difficult to quantify, its characteristics depending upon complex conditions of turbulence and viscosity, but when dealing with thin high-conductance barriers it can sometimes be quite significant.

Newton's law of cooling

There is a related principle, called Newton's law of cooling which states that the rate of heat loss of a body is proportional to the difference in temperatures between the body and its surroundings. This form of heat loss principle however is not very precise; a more accurate formulation requires an analysis of heat flow based on the heat equation in an inhomogeneous medium.

Nevertheless, it is easy to derive from this principle the exponential decay of temperature of a body. If T is the temperature of the body, then

where r is some positive constant. From which follows

For example, simplified climate models may use Newtonian cooling instead of a full (and computationally expensive) radiation codes to maintain atmospheric temperatures.

See also

• thermal conductivity

This is an Article on Heat conduction. Page Contains Information, Facts Details or Explanation Guide About Heat conduction

	Web www.E-paranoids.com