Bailey bridge Guide, Meaning , Facts, Information and Description
The Bailey bridge is a portable pre-fabricated truss bridge, designed for use by military engineering units to bridge up to 60 m (200 foot) gaps. It requires no special tools or heavy equipment for construction, the bridge elements are small enough to be carried in trucks, and the bridge is strong enough to carry tanks. It is considered one of the great examples of military engineering.
| Bailey bridge over the Coppename river at Witagron, Suriname, constructed 1976, photograph December 2002 |
Donald Bailey was a civil servant in the British War Office who tinkered with model bridges as a hobby. He presented one such model to his chiefs, who saw some merit in the design and had construction started at a slow rate. A number of bridges was available by 1944 for D-Day, when production was ramped up. The US also licensed the design and started rapid construction for their own use. Bailey was later knighted for his invention, which continues to be widely produced and used today - but see also A. M. Hamilton.
The basic bridge consists of three main parts. The "floor" of the bridge consists of a number of 19 foot wide transoms that run across the bridge, with 10 foot long stringers running between them on the bottom, forming a square. The bridge's strength is provided by the panels on the sides, which are 10 foot long cross-braced rectangles. These are placed standing upright above the stringers, and clamps run from the stringers to the panels to hold them together. Ribands are placed on top of the completed structural frame, and wood is placed on top of the ribands to provide a roadbed.
Each unit constructed in this fashion creates a single 10 foot long section of bridge, with a 12 foot wide roadbed. After one section is complete it is typically pushed forward over rollers on the bridgehead, and another section built behind it. The two are then connected together with pins pounded into holes in the corners of the panels.
For added strength several panels (and transoms) can be bolted on either side of the bridge, up to three. Another solution is to stack the panels vertically. With three panels across and two high, the Bailey Bridge can support tanks over a 200 foot span.
An astonishing feature of the Bailey bridge is its ability to be "launched" from one side of a gap. In this system the frontmost portion of the bridge is angled up into a launching nose and most of the bridge is left without the roadbed and ribands. The bridge is placed on rollers and simply pushed across the gap, at which point the roller is removed (with the help of jacks) and the ribands and roadbed installed, along with any additional panels and transoms that might be needed.
Stories of Bailey bridges being built and erected during WWII are legendary. In one instance a bridge was pushed over the Saar River while under artillery and tank fire. When the enemy was finally cleared out the panels had holes in them and would not carry the weight of a tank. Replacing the panels would require the bridge to be "broken" in the middle. Instead they simply bolted an entirely new set of panels onto the bridge on top of the original set, a technique that later became a standard feature.